Get Kenex Magno
-Capacity: 500 g.
-Accuracy: +/- 0.01 g
-Unit of weight: g, oz, ozt, dwt
-Tare range: Tara full capacity
-Auto-off time: 60 seconds
-Operating temperature: 10–30 °C
-Display: LCD display-Backlight
-Power : 2 x AAA batteries
This electronic set of scales is a precision instrument. With normal care and proper maintenance, it will serve you reliably for many years to come. Never load the scales with more than their maximum capacity. Overloading the device may cause permanent damage. Avoid exposing the scales to extreme heat or cold. They work better when used at normal room temperature. Allow the scales to acclimatise at normal room temperature for at least one hour before use.
Keep your scales in a clean environment. Dust, dirt, moisture, vibration, air currents and proximity to other electronic devices can have a negative impact on the reliability and accuracy of the scales. Please try to avoid rough handling, as this may cause permanent damage to the internal sensor. Avoid shaking or dropping it, otherwise it will throw the scales off. This is a precision instrument and must be handled with the utmost care. Now place the scales on a stable, vibration-free surface.
1. Operation:
1. Set the Turn the scales on a horizontal surface.
2. ON / OFF- button; press to to switch on the scales.
3. Wait until 0.0 displayed will be.
4. Place the Objects onto the scales.
2. Calibration:
1. Switch on the scales, through pressing the ON / OFF button
2. Wait until the LCD display displays 0.0 and then press and hold the MODE button for 3 seconds,
the display then shows CAL, and now then let the MODE button go again.
3. When you again press the MODE button, the display shows CAL followed by the amount of the required Calibration weight.
4. Set the desired calibration weight on the centre of the platform, then the display shows PASS and goes back to the normal weighing mode.
5. Take the calibration weight and press ON / OFF, to the extent.
And calibration has been completed.
